Thursday, June 27, 2013
Thursday, June 20, 2013
Thursday, June 13, 2013
I used one of my precious huge Bazzill flowers on this one. When I learned that they would be discontinued (several years ago) I bought nearly every remaining set my local paper crafting shop had left. It pains me a little every time I see one go. But hey, this is what they were made for! :)
Thursday, June 6, 2013
Friday, May 3, 2013
the always amazing ViHart! :)
Saturday, April 27, 2013
I've done once before. Using this thinner yarn, I'm hoping to make a pair that fits the tiny hands of my grandmother. My gauge is a whopping 50 stitches per 10 cm of stockinette stitch! That's a record. Also, that means I can procrastinate for a reeeeally long time with these mittens... Ravelry link.
Monday, April 22, 2013
Monday, April 15, 2013
Also, please excuse the teal tinge in the picture... Bad light, bad camera settings. Sloppy photography, this is. It's really white and silver, I promise. :)
Monday, April 8, 2013
There are lots of TARDIS cozies out there, but I wanted one that was more elegant, more stylish, and in a thinner yarn, and so decided to make up my own. Those who don’t watch Doctor Who (what?!?) will see this as abstract decoration, but I know better. ;)
Ravelry project page as usual.
Monday, April 1, 2013
Having done a lot of knitting with DROPS Baby Alpaca, I've had some issues with the very loosely wound skeins. They have a tendency to disintegrate and become a tangled mess in my knitting bag. Annoying. So I figured I would
have to love to figure out a DIY solution, something lightweight and sturdy. And so I did! Now, I might have spotted something like this around the mighty interwebz at some point and the idea buried itself in my back drawer of inspiration... Or possibly, this photo of a bagel case that has done the Pinterest rounds lately might be where I got the idea, who knows. But I've had so many questions and comments about my case that I figured it deserved its own post anyway!
The construction process is simple: Find a CD/DVD spindle case you don't mind
destroying repurposing. Make sure your skein will fit - there are many sizes available. Cut away the center pole in the base (now becoming the lid), leaving a hole in the center. Warning: this will take a sharp craft knife and some effort, as the plastic is quite sturdy. Some sort of power tool would probably make this task easier. Avoid cutting where the plastic is thickest and protect your fingers!! Missing fingers are not really an advantage for a knitter. Just saying.
Ready to start knitting! If you pull out too much yarn, just unscrew the lid and pull the yarn back, coiling it in the center, and reattach the lid. With this design, you'll have to place new skeins in the case before joining the yarn to the knitting - once you've started knitting with it, it's too late. If this is a deal-breaker for you, I suppose you could cut a slit from edge to center hole and slip the yarn through it, but that would be more trouble than it's worth for my part. It may affect stability and create edges that could catch the yarn and damage it. This version is simple, strong and functional.
The finishing touch: However hard I tried, I could not cut or sand the opening smooth enough to keep the yarn from snagging, so here is my own solution: I mixed a large dollop of epoxy glue, spread it on the edge of the opening and rotated the lid so the epoxy coated the cut edge evenly all around and on both sides of the lid. This requires a few minutes of continuous attention, but epoxy hardens fairly quickly and after a while you can put it down for a few minutes before flipping or rotating it. Just don't ignore it for too long until it has properly stiffened. When cured, the epoxy is perfectly smooth, even with all those bubbles! The yarn slides out easily without any damage.
If any of you read this and make your own, I'd love to know! Leave me a link in the comments and I'll come and check it out. :)
Monday, March 25, 2013
Monday, March 18, 2013
The base of this card is a pattern paper that I whitewashed with Gesso and water to lighten the colour. A few sprays of green GlimmerMist brought it to the right colour. I then went crazy with two kinds of washi tape, tearing strips and layering them roughly along the diagonal. Some stamping here and there adds to the detail. And then I added the molding paste, and the stars aligned. The hardened paste has absorbed some of the colour of whatever medium it rests on, so parts of it are faintly green from the GlimmerMist, and some are tan from the stamping ink. The parts that sits on the washi tape are still crisp white. It all adds to the drama!
There are so many layers of mediums on those chipboard numbers that I can't really remember them all... What's visible now is white Crackle Paint that's tainted green and brown by the Distress Ink layer below. Pretty good in the end, but it took a few tries to get the right look.
Monday, March 11, 2013
Now, this worked just fine, but I noticed a couple of things I knew I could find a solution to.
First: A bottle of ice water is, well, cold. No surprise there. Which made my fingers cold, which made my patients jump and twitch when I touched them, which, in turn, made taking x-rays of them a little bit tricky.
Second: If I left the bottle on a desk somewhere and didn't come back to it for an hour or so, it would collect quite an impressive puddle of condensed water. Which was merely inconvenient when the water dripped down my uniform making it half transparent, but really quite dangerous when the water gravitated towards electrical stuff (and that stuff's pretty much everywhere in a radiology ward).
Third: On hot days, there just wouldn't be enough ice to last the shift, even if I froze the bottle nearly full.
The bottle cozy not only keeps the water cold for longer, but is also nice to the touch and completely eliminates condensation. I brought it along on a canoe trip this summer, and enjoyed ice cold lake water the whole day, to the slight envy of my friend. I made her and her husband one each for christmas. :) Also, my cousin got one, but I seem to have forgotten to photograph it... Not a very exciting object, I suppose. I've got two myself, one for the 0,7 litre Imsdal bottle, and one for the 0,5 litre bottle.
How to make them, you ask? Well, it goes like this. Find a medium to thick yarn of 100% new wool, a hook that's one size smaller than recommended for the yarn. Make a tight spiral for the base, and just stop increasing when you start the wall. The cozy should be slightly wider and taller than your bottle (that's a precise technical measurement term, that). Hand felt in soapy water until snug (testing the fit regularly) and allow to dry on the bottle (refilling the bottle with warm water now and then speeds up that process). Ta-da, enjoy ice cold water anywhere. :) Ravelry links one, two, and three.
Monday, March 4, 2013
Details on Ravelry.
Friday, February 22, 2013
Also, it was fun to get a real impression of how much my lace knitting skills have improved. I’ve never thought about it until I re-knitted this pattern, which was my first attempt at lace knitting in 2010…
I thought I'd show you how I block straight edges, just for fun! Maybe you've seen it before, but hey, it's just one picture. On my bright, energetic green exercise mat. :) I don't own blocking wires and last time I did this scarf I used a million and a half pins, which only served to give me an edge of tiny scallops and a back that ached for three days... No more, I decided, and came up with this cheap DIY solution when the next triangular shawl was ready for blocking. I weave a strong cotton thread into the edge and stretch it taut between two strong pins. Every 10 cm or so I add another pin to keep it straight. Works like a charm. Two tips: weave in the cotton thread before soaking your knitware, and make sure it's more than long enough for the project in its finished size.
Saturday, February 16, 2013
I've finished a few knitting projects lately. Although, strictly speaking, I'm not sure September last year qualifies as "lately"... Ahem. The finishing of knitware can be the most time-consuming part of it all, whether it's weaving in those ends, or finally getting around to those pictures. In fact, this grey and purple cardigan was knitted in just two days, proving my point nicely.
It was a gift for a friend of mine's new little girl back in the aforementioned September, and I have since seen it in use - it seems the size was just right for this winter. This is wool, making it a nice add-on on a cold day. This is really a one size only recipe, but it provides three gauges that will yield cardigans of varying measurements. My particular yarn - needle combo gave me a gauge of 19 sts over 4inches, which corresponds nicely to the medium size. Please see my Ravelry page for details.
Thursday, January 31, 2013
Having made one sensible and neutral (and boring?) card for my brother's 30th birthday, I decided to go nuts on the other. My parents gave the first one, and I figured I should be his crazy sister and give him this montrosity! :)
The picture doesn't show it very well, but the chipboard "30" is painted in crackle paint and rubbed with some white ink to lighten it a bit. The monster paper has some sparkle in it and the "hey!" is lifted with 3mm pads.
Saturday, January 26, 2013
Wow, this was made a long time ago... It's for my brother's birthday, which is in October... Wow. Well, it's about time it made it to the blog then! :)
Clean and simple again, what else to do for a thirty year old man? The DCVW Latte stack has been my go-to stack in these cases for a while, the colours and patterns are so great. Not quite what I'd expect from the name, but I'm not the one to judge a stack by its cover. ;)
Wednesday, January 23, 2013
A good friend of mine sent me a picture of a panda hat and I suggested we did a trade - hat for embroidery. This is my end of the bargain! Cute, eh? :)
I did a search for panda hats and only found a couple of recipes, none that worked for me. The result was to improvise the whole thing. I made a grid in Excel and fiddled around until I got something that resembled a panda face. It took two tries, as the first one used too many stitches. The decreases are worked along the sides, where the ears were knitted on later. It's also on my Ravelry page.
Friday, January 18, 2013
Just a quick and easy card to get us started again. I still have a bug in the image uploading, but have found a different workaround that isn't too complicated. Possibly even easy enough to live with in the long run. :)
The layout is clean and simple, with not too much fuss. Just enough to give it a little bit of texture. It's actually a baby card, although that's quite understated. The baby feet and princess crown is all that gives it away...
Saturday, January 12, 2013
It's been a while. Again. Life gets in the way, more large knitting projects than quick cards, and so on. And I don't feel guilty about it! This blogging thing is fun - as long as there's no pressure. And since I have no advertisers to pressure me, I blog when I want. :) :) No regrets. :)
That being said, I've wanted to post some stuff lately but not been able to. There seems to be a bug in the image uploading that I haven't found a fix for yet. And what is a craft blog post without images??
Today you'll have to settle for this Instagram picture I managed to sneak in via an emergency solution (not one I will bother using in the long run). It's some absolutely gorgeous Manos del Uruguay yarn, a lovely Silk Blend skein I wound up. The biggest skeins I've ever wound. :) 13 cm in diameter, 10 cm high. Massive. You can always look me up on Ravelry, there are many WIPs there that will be finished in the near future.
I hope to figure out the image uploading thing soon and will be back with something to show you!
ETA: This might be related to the Java issue that has been in the news lately. I keep thinking about switching to Firefox or something like that, without getting around to actually doing it. Maybe this is the kick in the backside I need to get it done?
All the best until then,